24-hour hotline; 0591-83986202 Fuzhou Shuaikang hood maintenance repair cleaning off the range hood appliance repair Fuzhou Co., Ltd. is a professional cleaning service repair hood. Off range hood repair specialists companies licensed maintenance company has more than 40 site service personnel, in one step. Companies to high quality service, professional standards, excellent skills, reasonable price, good reputation and won customer support over the years and rely on. In the future we know that customer needs and concerns, so that customers no worries. 
 Hood repair common faults are as follows: 
 1, the hood after you were cleaning oil leakage. 
 2, the hood lights off, turned on switch, a smoking phenomenon. 
 3, the hood motor running but the noises in the great work. 
 4, the hood motor at work, but the wind is very small. 
 5, the smoke machine is turned on nothing happens. 
 6, the hood can not be turned off. 
 7, the hood machine leakage 
 Hood common faults and inspection methods: 
 First, do not start 
 1 Check the power outlet has power, plug and socket contacts and between the power switch is bad. 
 2, check the start capacitor is damaged, if damaged should be replaced with standard capacitors. 
 3, if the suspected death of motor bearing damage to the card, resulting in the shaft can not move, you can toggle to determine whether the card fan died, need to replace if damaged bearings. 
 4, if the number of problems were not found, the motor stator windings may be short or burnt, usually to rule out the need to replace the motor. 
 Second, ineffective fume extraction 
 1, for the newly installed range hood, you should first check the installation location is too high, the range hood's power is too small, and then check the following items one by one. 
 2, check out the outlet direction is appropriate, if the wind will lead to poor exhaust hoods, fume effects of pumping. 
 3, check the seal is good, including the hood and its own seal around whether the deformation of leaks, repair method is to plug the gap or replace range hood around the seal. 
 Third, too much noise 
 1, bearing wear serious. 
 2, blade loose or deformed. 
 Fourth, there is oil leakage 
 1, installed near the new range hood, oil spills may be poor installation point of view (mainly lack of elevation), to adjust to. 
 2, there is no clear long-term oil box. 
 3, seal deformation failure, causing oil spills Mifengbuyan, just seal can be replaced or repaired. 
 Fifth, housing leakage 
 1, there is no ground wire or ground installation is bad (and sometimes induced voltage), if necessary, re-installed ground wire, and make good contact. 
 2, the internal wiring or connector damage, resulting in live shell to check all internal wiring and connectors, if necessary, be insulated with insulating tape. 
 3, the motor stator winding insulation aging of the local, resulting in live shell, the failure will normally take apart the motor processing. 
 Phone; 0591-83986202